Home Automation 5V-24V RF Switch Touch Panel Wall Switch RGB Flowing Wireless Addressable Running Water Flowing LED Controller

• Customization: Available
• Certification: CE, RoHS
• Remote Control: With Remote Control
• Load Type: Direct
• lighting Variation: Stepless
• Switch Device: Active
• Application: Exhibition Hall, Hotel, Stage, Home Lighting
• Power Source: DC
• Control Mode: Electronic Dimmer
• Control Points: up to 1024 Pixels Can Be Controlled
• Remote Control Distance: 15 Meters(Equipped with 86 Box Base)
• Effect Mode: 366 Lighting Effects
• Transport Package: Box
• Specification: DC5-24V
• Trademark: /
• Origin: China
• Package Size: 10.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 0.100kg

Product Description

Home Automation 5v-24v RF Switch Touch Panel Wall Switch RGB Flowing Wireless Addressable Running Water Flowing LED Controller

1. Product features:
1. Working voltage: DC5-24V
2. Control points: Up to 1024 pixels can be controlled
3. Remote control distance:15 meters(equipped with 86 box base)
4. Battery model:CR2025button cell
5. Effect mode:366 lighting effects
6. Product size:L43*W22*H11mm
2. Remote control function description:

1. Mode+/-:366 modes can be switched, and each mode can adjust brightness and speed.
2. Static color:14 static mode loop switching.
3. Brightness+/-:10 levells.
4. Speed+/-:10 levels.
5. Press and hold the slatic color button for more than 5 seconds to automatically play,

3. Point adjustment:
In the shutdown state, press and hold the Wbutton and the light will light up to enter the setting state. At this time, press MODE+ slow adjustment to increase the number of points, press BRIGHT+ fast adjustment to increase the number of points, press MODE- slow adjustment to decrease
the number of points, and press BRIGHT fast adjustment to decrease the number of points.
After adjustment, press the switch to save.
4. Line sequence adjustment!
In the shutdown state, long press the W button and the light will light up to enter the setting
state. At this time, press SPEED+ and SPEED- to adjust the wire sequence from front to back, displaying R(red), G(green), B(blue)as the correct wire sequence. After adjustment, press the ON key to save.
5. Product code checking and clearance instructions:
Code matching (one- on- one control): Press and hold the on button for 5 seconds after the controller is powered on, and the light bar will slowly flash 3 times.
Clear code (one to many control): Press and hold the on button for 5seconds after the
controller is powered on, and the light bar will flash 3times quickly.
6. wiring diagram:



Basic Parameters:
1. Working Voltage: DC12-24V
2. Number of control points: maximum can control 2048 pixels
3. Remote control distance:15 meters
4. Battery model: CR2025(product included 1 pc)
5. Effect mode:20 modes

IC Set: Press IC Set button to enter the IC set mode. Press "  " to increase IC, Press " " to decrease IC. press and hold to fast adjust. After the adjustment, press the " power on/ off button" to save and exit.The default is 80 pixels, and the maximum can adjust to 2048 pixels.
Dimming circle: stepless dimming
Speed: Speed+ and speed-, 10 steps. press and hold to fast adjust

Mode List
1. Turn on the lights and the water is always on, turn off  the lights and light back flow & turn off  the lights
2. Turn on the lights and the water is always on, turn off the lights and light flow forth & turn off the
lights
3. The water flowing from the two ends to the middle is always on, and the lights are turned off and the water flows back to the two ends.
4. The water flowing from the middle to the two ends is always on, and the two ends of the light are turned off to return to the middle
5. Turn on the light and the flowing water is always on (with breathing gradient), turn off the
back flow and turn off the light
6. Circulation mode: turn on the lights and 5 IC meteors trail, turn off the lights and turn off the lights
7. Circulation mode: turn on the lights and flow water, 7 ICs trailing water at both ends, turn off
 the lights and return to turn off  the lights
8. Cycle mode: turn on the lights and run the water,2 ICs chase the horse, turn off the lights and turn off the lights
9. Cycle mode: turn on the lights and run water with 5 ICs chasing the horse, turn off the lights
and return to turn off the lights
10. Cycle mode: turn on the lights, 1 IC marquee +4 IC meteors trailing, turn off the lights and
return to turn off the lights
11. Cycle mode: turn on the lights, 9 IC meteors are piled up, and the water trailing effect
12. Cycle mode: turn on the light and fade once, 9 IC meteors are piled up, and the water trailing
effect
13. Circulation mode: turn on the light and flow water from both ends to the middle
14. Circulation mode: water flowing from the middle of the light to both ends
15. Circulation mode: turn on the light and flow water from both ends to the middle, and turn
off  the light from the middle to both ends
16. Circulation mode: turn on the light, the water flows to the two ends, and the two ends go to the middle to turn off the light
17. Circulation mode; turn on the light and flow forward
18. Circulation mode: turn on the lights and return the flowing water
19. Circulation mode: turn on the light to flow the water forward, and flow the water back
20. Circulation mode: turn on the light and flow forward, turn off the lights in the downstream, flow back and turn off the lights

Code matching and code clearing
Code matching: Long press the  "  "   button within 5 seconds after the controller is powered on,
 the light flashes 3 times slowly.
Code clearing: Long press the   " "  button within 5 seconds after the controller is powered on,
 the light flashes 3 times quickly.

FAQ
Q1: Are you manufacturer or trading company?
A1: We are a manufacturer specialized in designing and producing 12V 24V LED lighting for RV, caravan, camper, marine, hotel, hospitality industry.
Q2: Can we have our own LOGO on products and all packages?
A2:Yes, we always provide private label service, Please inform us your requirements about the Logo, we'll make samples for your confirmation before production.
Q3.What is the warranty about your product ?
A3 : Our products have 3 year warranty .If our product have any quality problem on our side occurred in this period ,we will send replacement free.
Q4: Do you have quality control in your factory?
A4:Yes, Of course, Quality is always the first important in our factory, During our Purchasing all the Materials, We have
professional team to check the quality of all materials,; During production, we have professional team to check the spare parts quality and assemblies. After finish products before packing. We have professional team to check the product quality and appearance.
Q5: What certification does your product have?
A5: We got the certificates of CE, RoHS, EMC, ETL, R10.
Q6: How long is your delivery time?
A6: Our delivery time is generally 5-20days. Quantity 1-100PCS delivery 5days.